Description
Confined Spaces
Instructor: Josh Francis
29 CFR 1926 – Subpart AA Confined Spaces in Construction sets forth requirements for practices and procedures to protect employees engaged in construction activities at a worksite with one or more confined spaces. Examples of locations where confined spaces may occur include, but are not limited to, the following: Bins; boilers; pits (such as elevator, escalator, pump, valve or other equipment); manholes (such as sewer, storm drain, electrical, communication, or other utility); tanks (such as fuel, chemical, water, or other liquid, solid or gas); incinerators; scrubbers; concrete pier columns; sewers; transformer vaults; heating, ventilation, and air-conditioning (HVAC) ducts; storm drains; water mains; precast concrete and other pre-formed manhole units; drilled shafts; enclosed beams; vessels; digesters; lift stations; cesspools; silos; air receivers; sludge gates; air preheaters; step up transformers; turbines; chillers; bag houses; and/or mixers/reactors.
This Course Covers:
- Scope & Definitions
- General Requirements
- Permits and the process
- Training
- Rescue and Emergency Services
Hot Work
Instructor: Nelson Gelinas
Hot work is any activity or process that creates flames, generates sparks, or heat, and includes welding, grinding, cutting, brazing etc, and any similar applications producing or using sparks, flame or heat. The risk with hot work is high because it introduces a hazard—an ignition source. This course will focus on the various steps to take to ensure hot work is performed in a safe manner.
This Course Covers:
- Hot Work Permit
- Personal Protective Equipment
- Fire Watch
- Tank Storage
- Hot Work Area
- Other Common Hazards
- Hexavalent Chromium
SILICA SAFETY
Instructor: Josh Francis
Construction workers are exposed to respirable crystalline silica in over 600,000 workplaces each year. OSHA estimates that more than 840,000 of these workers are exposed to silica levels exceeding the Permissible Exposure Limit (PEL). This one-hour course reviews OSHA regulations and the safety codes surrounding silica safety.
This course covers:
- Introduction to Silica
- PEL Limits
- Employer Responsibilities
- Respiratory Protection
- Respiratory Protection
- Exposure Control Methods
Respiratory Protection Course
Instructor: Nelson Gelinas
Respirators protect workers against insufficient oxygen environments, harmful dusts, fogs, smokes, mists, gases, vapors, and sprays. These hazards may cause cancer, lung impairment, diseases, or death. Compliance with the OSHA Respiratory Protection Standard could avert hundreds of deaths and thousands of illnesses annually. This course outlines the types of respirators available, proper fit, and inspection/maintenance requirements.
This Course Covers:
- Identifying the hazards
- Training
- Medical evaluation questionaire
- Fit testing
- Fit check
- Maintenance
- Proper storage
- Cartridges/gaskets
- Types
- Correct cartridges for toxin
- Facial hair
Hazard Communication
Instructor: Nelson Gelinas
In order to ensure chemical safety in the workplace, information about the identities and hazards of the chemicals must be available and understandable to workers. This course will outline employee Right-to-Know information, the Global Harmonizing System, Safety Data Sheets, and labels.
This Course Covers:
- Employee Right-to-Know
- Global Harmonizing System
- Reading the Label
- HMIS and NFPA Systems
- Safety Data Sheets
Fall Protection Course
Instructor: Nelson Gelinas
Falls are one of the most common types of serious injuries and deaths. Employers are responsible for maintaining a safe working environment, but when fall protection devices are impractical, personal fall protection equipment may be used. This course outlines the standard equipment use, maintenance and inspection requirements for harnesses, lanyards, lifelines, tethers and more.
This Course Covers:
- Choosing the right equipment:
- Positioning devices, rescue/retrieval devices
- Harnesses
- Lanyards
- Anchorage
- Rescue plans
Personal Protective Equipment Course
Instructor: Nelson Gelinas
Personal protective equipment, commonly referred to as “PPE”, is equipment worn to minimize exposure to a variety of hazards. Examples of PPE include such items as gloves, foot and eye protection, protective hearing devices (earplugs, muffs) hard hats, respirators and full body suits. This course will outline the most common forms of PPE used in the workplace.
This Course Covers:
- Purpose
- Hazard Assessment form
- Hard Hats
- Eye Protection
- Hearing Protection
- Foot Protection
- Gloves
Job Safety Analysis
Instructor: Nelson Gelinas
A job hazard analysis is a technique that focuses on job tasks as a way to identify hazards before they occur. It focuses on the relationship between the worker, the task, the tools, and the work environment. Ideally, after you identify uncontrolled hazards, you will take steps to eliminate or reduce them to an acceptable risk level. This course outlines the basic steps of a Job Safety Analysis.
This Course Covers:
- What is a JSA?
- Why Have One?
- Parts of the form
- Task
- Hazard
- Control
Controlling Hazardous Energy Course
Instructor: Nelson Gelinas
This training program covers Lockout/Tagout procedures for the use of appropriate lockout or tagout devices designed to isolate or disable equipment in order to prevent unexpected start up or release of stored energy, causing injury to employees.
This Course covers:
- Importance of lockout/tagout
- Employees:
- Energy sources disabled:
- Tags
- Group lockouts
- Stored energy release
- Account for tools and replace guards
Fire Safety Course
Instructor: Nelson Gelinas
This course highlights standards related to fire safety, including prevention, types of fires, extinguishers and best practices and covers:
- Prevention
- Extinguishers
- Operating extinguishers
Bloodborne Pathogens
Instructor: Nelson Gelinas
Bloodborne pathogens are infectious microorganisms in human blood that can cause disease, and be easily passed from one person to another. This course will outline the basic precautions every person should observe when working in a workplace where accidents can occur.
This Course Covers:
- Introduction
- Other Potentially Infectious Material
- 5 Primary BBBs
- Universal Precautions
- PPE
- Clean-Up/Disposal
Tool Box Talks
In this section you will be able to access:
- 24 Toolbox Talks
If you have any questions
Please call us at 1-800-727-7104 | Monday-Friday | 8am-8pm
Or send an email to info@onlinecti.com. Email responses will be returned promptly within one business day.